goglrental.blogg.se - Kitchenaid built in refrigerator loudfan

KITCHENAID BUILT IN REFRIGERATOR LOUDFAN HOW TO

The compressor helps to circulate refrigerant through the evaporator and condenser coils. If this doesn’t happen, you will need to replace the thermistor.

The test should show that the resistance changes when the refrigerator temperature changes.

Locate the thermistor and test it with a multimeter.

Make sure that the refrigerator is still turned off.

If it becomes faulty, it might send the wrong temperature reading, and this will adversely affect your refrigerator operation. This component monitors the refrigerator temperature, which it then sends to the control board. The thermistor is the next component to check.

Locate the start capacitor and then use a multimeter to test it for continuity.

Make sure the refrigerator is turned off.

When it becomes faulty, your refrigerator won’t be able to cool. This component is important because it provides a boost of power to the compressor when it is trying to start up. The next component to check is the start capacitor.

If it has continuity, it is working fine, and if not, it needs to be replaced.If you don’t hear a click sound, you’ll need to use a multimeter to test it for continuity.If you hear the click sound, this means the thermostat is working correctly, and you can move on to checking the next component. Turn the thermostat from its highest setting to its lowest setting, and listen to see if you can hear a click sound.Make sure the refrigerator is still turned off.

KITCHENAID BUILT IN REFRIGERATOR LOUDFAN HOW TO

Here’s how to check the temperature control thermostat: This component is very important because it directs voltage to the compressor, evaporator fan motor, and condenser fan motor. If the continuity test shows no continuity, you’ll need to replace it.Īnother possible cause is a faulty temperature control thermostat.If there is no burnt smell, use a multimeter to test it for continuity (between the run and start terminal sockets). If you can smell a burnt smell, the start relay is likely defective and needs to be replaced. Make sure that the refrigerator is turned off.It helps your refrigerator cool by working with the start winding to start the compressor. The next component to check is the start relay. If the test shows that the windings do not have continuity, you’ll need to replace the evaporator fan motor.If the motor isn’t working at all, then use a multimeter to test the motor windings for continuity.If the fan blade does not turn freely, replace the fan motor. Next, attempt to turn the fan blade around by hand.If the motor isn’t noisy, the next thing you want to do is turn the refrigerator off.When the refrigerator is running, listen to the fan motor to see if it is noisy, and if so, this is a sign that the motor is faulty and needs to be replaced.Locate the evaporator fan – you can find it in the freezer compartment.Like the condenser fan motor, this one can sometimes become faulty, which stops your refrigerator from being able to cool. Your refrigerator will also have an evaporator fan motor. If it fails the continuity test, you’ll need to replace the condenser fan motor.

If the fan motor is working correctly, the test will show it has continuity, and if it isn’t working, the test will show it doesn’t have continuity.

If it can move around, use a multimeter to test the fan.

If the fan cannot move the whole way around, this means it is faulty and needs to be replaced.

If not, try to turn the fan the whole way around by hand.

Check that no obvious objects are obstructing the fan from moving around.

Make sure the refrigerator power is turned off.

Here’s how to check the condenser fan motor: When it stops working, your refrigerator won’t cool. The purpose of this fan is to spread air through the condenser coils onto the compressor. If the condenser coils are fine, the next component to check is the condenser fan.

Once cleaned, plug the refrigerator back in and see if the problem is fixed (you might have to monitor the refrigerator for 6 hours or so).

If dirty, give them a good clean (you can use a vacuum cleaner to vacuum up the dust).

Inspect the coils to see if they are dirty.

Find the condenser coils – you should be able to find them under the fridge.

Sometimes they get dirty, and this adversely affects their ability to keep your refrigerator cool. The condenser coils help keep the refrigerator cool by dissipating heat when the refrigerant passes through them. This guide covers most major models of KitchenAid refrigerators, including: Thankfully, most of the components are quite straightforward to fix. If you check each of the components that we list in this article, you should be able to find the culprit and fix it. If your KitchenAid refrigerator is not cooling, then it could be due to a number of different problems.